Installed Costs and Deployment Barriers For Residential Solar PV + Storage Systems

Industry Insights
Typography

Researchers from the U.S. Department of Energy (DOE) National Renewable Energy Laboratory (NREL) are making available the most detailed component and system-level cost breakdowns to date for residential photovoltaic (PV) solar systems equipped with energy storage-and quantifying previously unknown soft costs for the first time.

The report, titled "Installed Cost Benchmarks and Deployment Barriers for Residential Solar Photovoltaics with Energy Storage: Q1 2016," was written by researchers from NREL, the Rocky Mountain Institute, and the Energy Department.

Behind-the-meter energy storage products have the potential to optimize the value of rooftop solar photovoltaic (PV) systems while increasing the flexibility of electricity consumers and enhancing grid operations. However, significant cost and value barriers continue to hinder the large-scale deployment of PV-plus-storage systems as per the report.

KEY COST FINDINGS

The report presented results for two grid-tied system applications, which it referred to as the “small-battery case” and “large-battery case,” in addition to several typical system configurations.


 

The small battery case—which uses a 5.6-kW PV array and a 3-kW/6-kWh lithium-ion battery system—is designed to provide back-up power for a limited number of critical loads in the event of a grid outage and enable a typical customer to optimize self-consumption of PV electricity (including peak-demand shaving and time-of-use shifting).

The analysis covers alternating current (AC)- and direct current (DC)-coupled systems for residential use, as well as retrofitting batteries to installed arrays, and the costs of enhancing the resiliency benefits of the combined system by switching to a battery with greater capacity. Both systems are designed to provide back-up power for critical loads in the event of a grid outage, and they enable a typical customer to optimize self-consumption of PV electricity-including peak-demand shaving and time-of-use shifting.

The authors separate installed system cost into 13 categories that range from direct hardware costs, such as the PV modules and batteries themselves, to soft costs that include items such as labor for installations, permitting and inspections, and net profits. The resulting cost for a DC-coupled system that integrates a 5.6-kilowatt (kW) PV array and a 3-kW/6-kilowatt-hour (kWh) battery is $27,703, which is roughly half hardware costs and half soft costs. An AC-coupled system, which can be more effective in applications that tend to use the energy from the PV array at the time of generation, costs $1,865 more if the battery is installed at the same time as the array. In settings where the battery is retrofitted to an existing AC-coupled system, the cost is increased by $3,218 to $32,786. The system design that provides for greater resiliency with a 5-kW/20-kWh battery costs $45,237 ( approx. 29.4 lacs) when DC-coupled and $47,171 (approx. INR 30.66 lacs) when AC-coupled.

This granular cost breakdown offers deeper insights into the potential for cost reductions than simply looking at price trends or hardware costs alone. It also provides critical information on where stakeholders should focus cost-reduction efforts. This cost benchmarking will be updated periodically to allow the tracking over time of the progress in declining costs.

The above Figure shows the benchmarking results for this application, including new direct-current (DC)- and alternating-current (AC)-coupled systems (when PV and storage are installed simultaneously) and AC-coupled systems with the storage system retrofitted after the PV array. The benchmarked price of such a system is about twice as high as the price of a standalone 5.6-kW PV system. The DC-coupled system price ($27,703 approx INR 18 lacs) is $1,865 lower than the AC-coupled system price ($29,568 approx 19.21 lacs) for a new PV-plusstorage installation.

The price premium for AC-coupled systems is mainly due to higher hardware, labor, and sales and marketing costs associated with the additional grid-tied inverter and more complex system design and engineering requirements. However, installed price is not the only consideration when comparing AC- and DC-coupled systems: AC-coupled systems are more efficient in applications where PV energy is generally used at the time of generation, and DC-coupled systems are more efficient in applications where PV energy is stored and used later. The installed price is $32,786 (approx 21.31 lacs)  for an AC-coupled system when the battery is retrofitted to an existing PV array, which is $3,218 higher than the price of installing the PV and storage simultaneously. The simultaneous installation results in savings related to installation labor and electrical wiring as well as indirect costs (supply chain costs, overhead, regulatory costs, and profit).

"There is rapidly growing interest in pairing distributed PV with storage, but there's a lack of publicly available cost data and analysis," said Kristen Ardani, lead author of the report and a solar technology markets and policy analyst at NREL. "By expanding NREL's well-established component- and system-level cost modeling methodology for solar PV technologies to PV-plus-storage systems, this report is the first in a series of benchmark reports that will document progress in cost reductions for the emerging PV-plus-storage market over time."

Declining costs in customer-side energy-storage products have opened the door for batteries to improve the value and flexibility of residential PV systems while falling costs in PV technologies have been driving the growing adoption of combined PV and storage solutions. However, gaps remain in developing an in-depth understanding of the costs of combined PV and battery systems and in effectively communicating their value proposition.

Through in-depth analysis of those costs and barriers to adoption, the report's authors provide technology manufacturers, installers, and other stakeholders with invaluable information to help guide their efforts to identify cost reduction opportunities. In addition, the analysis informs decision makers on market factors that are headwinds to further growth.

This in-depth cost analysis and accompanying stakeholder interviews also uncovered key barriers to adoption of combined PV-and-storage systems. These challenges vary across different contexts, but include inconsistent permitting processes, complexity in adequately valuing the benefits of energy storage, and flat utility rates. The authors discuss steps to consider in reducing these barriers and decreasing associated costs, such as the importance of educating permitting officials about storage technologies.

 

 

Translator

Advertisement

SolarQuarter Tweets

Follow Us For Latest Tweets

SolarQuarter Biggest Solar Rooftop Business Opportunity in Your City_Register Now For SolarRoofs Pan India Series… https://t.co/IgqKNEvJrM
Monday, 24 July 2017 05:26
SolarQuarter Challenges developers & epc players face while procuring modules? Pv moduletech @acmemarkets @ENGIEgroup https://t.co/YupP48y2gX
Friday, 21 July 2017 08:36
SolarQuarter Another informative presentation coming up by @ZNSHINESOLAR solar Pv moduletech India 2017
Friday, 21 July 2017 07:37
SolarQuarter Mr Oakland Fu , @DuPont_News solar Pv moduletech India https://t.co/hrYZaZe6tn
Friday, 21 July 2017 07:36

Advertisement
Advertisement