Deye Offers Solution Which Are Rightful For Residential And Commercial And Industrial Segment in Both Single Phase And Three Phase Connections.

Deye grid tied inverters are available from 1.5kW to 6.2kW while three phase inverters starts from 5kW to 136kW. Deye also offers hybrid inverters for locations where frequent power outages are observed. The low voltage hybrid inverters available from 3kW to 12kW supports lead acid batteries and lithium batteries while high voltage hybrid inverters support lithium batteries that starts from 5kW to 50kW.

Additionally, Deye provides reliable and high-performance LiFePO4 based energy storage systems which stores energy and discharge whenever required.  

Deye has containerised solution for C&I sector with all in one hybrid ESS available at 50kW/60kWh and for AC coupling applications, PCS and lithium battery of 100kW/230kWh solution.  

Solar Plant 

Overloading solar plant enables end users to achieve 1:1 ratio output due to the losses involved like cable loss, less irradiation, temperature, soiling e+ffect, shading effect etc. Deye ongrid and hyrbid inverters allows oversizing the solar plant upto 50% and 30% respectively. 

Diesel Generator 

This feature in inverters grants existing diesel generator to integrate to the system. 

Supports Unbalanced Load 

Wide voltage range in inverters meets the voltage fluctuation in DC or AC input.  

The hybrid inverter supports 100% unbalanced load with 50% in two phases. These inverters can handle surge peaks by allowing upto 2 times of the rated capacity for 10s.  

Zero Export 

Deye inverters have inbuilt zero export feature which enables to limit the daily generation as per running load. 

Monitoring System 

Local and remote monitoring in inverters enable to analyse the performance of the plant and to remotely change the operating parameters and upgrade the system whenever available. High rating inverters also have string monitoring feature. 

AC and DC Coupling 

Deye product supports retrofitting of the hybrid inverter to existing on-grid plant by connecting it on the AC bus bar. Hybrid inverters can also be connected to the DC bus bar.  

The containerised solution for MW scale applications converts AC electricity from grid or renewable energy sources into DC electricity to store in lithium batteries. 

Time of Use 

The “Time of Use” feature in hybrid inverters enables to set the window for charging and discharging the batteries based on peak and off-peak hours tariff and demand. 

Further, hybrid inverter turn on the smart load automatically when the SoC of the battery 100% and turn off the load when it reaches its specified lower limits so that smart load are run only on batteries. 

High Performance Batteries 

The plug and play lithium batteries ensure timely dispatch of energy to cater the peak load demand. For residential applications 25.6V and 51.2V batteries are available. Deye’s high voltage batteries ranging from 160-800V for C&I applications. 

The inbuilt intelligent BMS batteries manages and automatically balances the current and voltage of each cell. Thus, the BESS helps in frequency regulations, peak shaving and power management. These can operate for ~6000 cycles. The future expansion and flexibility in connection is possible.